The board has zero camber except for a big rocker on the tip. The powder rocker im- proves floatability and stability in deep powder snow.

This core is also made from two types of poplar. The denser parts (80% of the core) are placed around the inserts (for skis, under the foot) and above the edges, for even more resistance. This solid and snappy core enables stable and dynamic turns.

The 2D (0/90°) fibreglass weave has 80% of its weight in the axis of the board, and 20% perpendicularly. It gives the board good pop whilst keeping it manoeuvrable and softer in torsion (compared with 3D fibreglass) to make it more forgiving.

A V-shaped, 40 mm wide carbon strip, placed on the tip and the tail, increases the board’s pop and rebound.

The woodcore has a slight dip in thickness between the inserts, to make the board more manœuvrable without losing it’s flex and energy.

The higher molecular density makes these bases the reference in terms of durability and gliding performance, especially on very cold snow. Be sure to wax your base often to get the most out of it.
All our bases are factory-tuned with wax.

Stone ground bases glide much better on wet snow thanks to the structure which enables the water drops to escape quicker under the board.

The sidewalls are slanted, made of ABS and are silk-screen printed.

100% Directional: A longer, progressive tip, significant insert setback, pintail (wider tip than tail), a softer tail, and longer side cut radius make freeride boards more stable and efficient on and off the piste.