The board has camber between the feet, and a symmetrical rocker on tip & tail. The board is more stable at high speeds and enables betters floatability in powder snow.

The board has zero camber, it is totally flat. This is the perfect compromise between having a board with camber or one with a rocker.

This core is made from two types of poplar. The denser parts (50% of the core) are placed around the inserts (for skis, under the foot) for added strength and resistance. This core is light and snappy to provide a dynamic ride and beefed up pop.

The 2D (0/90°) fibreglass weave has 80% of its weight in the axis of the board, and 20% perpendicularly. It gives the board good pop whilst keeping it manoeuvrable and softer in torsion (compared with 3D fibreglass) to make it more forgiving.

X and V-shaped, 40 mm wide carbon strips, placed on the tip and the tail, boost the board’s pop. They increase its responsiveness for ollies and at the end of turns.

The woodcore has a slight dip in thickness between the inserts, to make the board more manœuvrable without losing it’s flex and energy.

The higher molecular density makes these bases the reference in terms of durability and gliding performance, especially on very cold snow. Be sure to wax your base often to get the most out of it.
All our bases are factory-tuned with wax.

Stone ground bases glide much better on wet snow thanks to the structure which enables the water drops to escape quicker under the board.

The sidewalls are slanted, made of ABS and are silk-screen printed.

90% Twin Tip: Tip and tail radiuses are nearly identical, the woodcore and inserts are centred, and the sidecut radius is much shorter, making these boards the perfect freestyle toy.